Denmark
Finland
Norway
Sweden
International
Germany
Installation instructions now available for the 59mm S-Series floor gully
We have recently published new installation instructions for our 59mm S-Series Floor Gully. The instructions provide a comprehensive and easy-to-follow guide for installing the super low-level gully.
We have recently published new installation instructions for our 59mm S-Series Floor Gully. The instructions provide a comprehensive and easy-to-follow guide for installing the super low-level gully.
Our 59mm Minimax S-Series floor gully is suitable for both vinyl and tiled floor finishes. With a total height of just 59mm allowing it to fit into shallow concrete slabs, the 59mm S-Series gully includes our combined water and mechanical NOOD no-odour water trap which was used in the London 2012 Athletes Village. Due to a change in screed depth requirements across the construction industry, we have taken the same successful technology as our Minimax 50 and made the gully even shallower. The S-Series gully has a total height of just 59mm allowing it to fit into shallow concrete slabs.
The NOOD trap uses a spring mechanism to prevent any foul air from escaping through the gully even when it dries out and it is extremely simple to clean and maintain. The floor gully also introduces a brand new stainless steel clamping ring designed for screwing either vinyl or waterproof membrane for tiles down into the floor gully.
A range of stainless steel grate options are available for the 59mm S-Series floor gully – you can view all of the options here. The Drop grate for vinyl floors has a 150mm diameter and slots into the gully above the vinyl flooring once clamped into place; and our 200x200mm PK200 grates are also available in a selection of patterns for tiled floors.
To view the installation instructions, please click here. For further information on the 59mm S-Series floor gullies, you can go to our Product Pages or Contact Us.